Dionex™ IonPac™ UTAC-1 Series Ultratrace Anion Concentrator Columns, (UTAC-LP1, UTAC-ULP1, UTAC-XLP1) for IC (Thermo Scientific™)

Key Features

Dionex IonPac anion concentrator columns are designed primarily for high-purity water analysis. The concentrator column retains anions from a measured volume of aqueous sample matrix, concentrating the analyte species and lowering detection limits by 2-5 orders of magnitude.

• Dionex IonPac UTAC-LP1 (4x35mm) low pressure (<60 psi at 2mL/min) anion concentrator
• Dionex IonPac UTAC-ULP1 (5x23mm) ultralow pressure (<30 psi at 2mL/min) anion concentrator
• Dionex IonPac UTAC-XLP1 (6x16mm) extremely low pressure (<10 psi at 2mL/min) anion concentrator

• For 4mm or 2mm applications
• Compatible with carbonate/bicarbonate, borate, or hydroxide eluents with or without solvents
• Dionex IonPac UTAC-LP1 concentrator (4x35mm) is for use with syringe or autosampler loading (Dionex AS‑DV Autosampler), or is appropriate for use with a pressurized bottle, or a single piston sample delivery pump for sample loading.
• Dionex IonPac UTAC-ULP1 (5x23mm)) and TAC-XLP1 (6x16mm) concentrators are for use with syringe or autosampler loading (Dionex AS-DV and AS Autosamplers). They can be used with single piston sample delivery pumps including the Dionex AXP Auxiliary Pump.

Order Codes