Remote alarm module, for refrigerators and freezers (Thermo Scientific™)

Key Features

Alarm Delay Module

• Eliminates nuisance alarms due to intermittent voltage flux from lightning or brief power outages
• Adjustable delay releases signal to alarm/monitoring system only when alarm condition continues for specified time period
• Digital timer can be set from 0.5 to 32 minutes
• Red alarm light flashes to indicate transient event; must be manually reset
• Signals chronic alarm conditions that may indicate impending component failure; allows time for inspection or corrective maintenance
• Inserts variable time interval between detection of alarm condition and transmission of signal
• Includes accurate digital timing circuit adjustable from 0.5, 1, 2, 4, 8, 18 or 32 minutes
• Operates independent of line power; built-in battery and alarm test uses customer-supplied 9V battery
• Overall dimensions, 1.62L × 2.5W × 4.75in.H (1.6 × 6.4 ×12.1cm)

Deluxe Electronic Remote Alarm System

• Can be programmed to sound an alarm in the event of a temperature increase or power failure. 120V/60Hz
• Alarm can dial up to four telephone numbers
• Signals an alarm condition across any telephone system that accepts pulse dialing
• One system can monitor up to four individual freezers or up to three groups of freezers
• Requires dedicated phone line

• Not for sale in countries that require a CE mark

Electronic Local Alarm Systems

• Use with high-performance lab refrigerators and freezers
• Freestanding system includes keyed ON/OFF alarm switch, audible and visual alarms for power failure and temperature deviation, audio silence button, and alarm test button
• Painted metal cabinet with digital temperature display and keyed alarm switch
• Must be customer installed

Standard Remote Alarm System

• Use with general-purpose freezers and refrigerators; chromatography refrigerators equipped with accessory electronic local alarm system; and ultralow-temperature freezers
• Can be located up to one-third mile from unit and used with either normally open or normally closed contacts
• Emits both audible and visual signal in the event of power failure or temperature deviation
• Wire not included
• For 115V
• Requires factory-installed alarm system

Order Codes